Manufacturing and Properties of Binary Blend from Bacterial Polyester Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and Poly(caprolactone) with Improved Toughness
Open Access
- 13 May 2020
- Vol. 12 (5), 1118
- https://doi.org/10.3390/polym12051118
Abstract
Polyhydroxyalkanoates (PHAs) represent a promising group of bacterial polyesters for new applications. Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH) is a very promising bacterial polyester with potential uses in the packaging industry; nevertheless, as with many (almost all) bacterial polyesters, PHBH undergoes secondary crystallization (aging) which leads to an embrittlement. To overcome or minimize this, in the present work a flexible petroleum-derived polyester, namely poly(ε-caprolactone), was used to obtain PHBH/PCL blends with different compositions (from 0 to 40 PCL wt %) using extrusion followed by injection moulding. The thermal analysis of the binary blends was studied by means of differential scanning calorimetry (DSC) and thermogravimetry (TGA). Both TGA and DSC revealed immiscibility between PHBH and PCL. Mechanical dynamic thermal analysis (DMTA) allowed a precise determination of the glass transition temperatures (Tg) as a function of the blend composition. By means of field emission scanning electron microscopy (FESEM), an internal structure formed by two phases was observed, with a PHBH-rich matrix phase and a finely dispersed PCL-rich phase. These results confirmed the immiscibility between these two biopolymers. However, the mechanical properties obtained through tensile and Charpy tests, indicated that the addition of PCL to PHBH considerably improved toughness. PHBH/PCL blends containing 40 PCL wt % offered an impact resistance double that of neat PHBH. PCL addition also contributed to a decrease in brittleness and an improvement in toughness and some other ductile properties. As expected, an increase in ductile properties resulted in a decrease in some mechanical resistant properties, e.g., the modulus and the strength (in tensile and flexural conditions) decreased with increasing wt % PCL in PHBH/PCL blends.Keywords
Funding Information
- Generalitat Valenciana (ACIF/2016/182)
This publication has 48 references indexed in Scilit:
- Biodegradable Urea–Formaldehyde/PBS and Its Ternary Nanocomposite Prepared by a Novel and Scalable Reactive Extrusion Process for Slow-Release Applications in AgricultureJournal of Agricultural and Food Chemistry, 2020
- Bioengineered Polyhydroxyalkanoates as Immobilized Enzyme Scaffolds for Industrial ApplicationsFrontiers in Bioengineering and Biotechnology, 2020
- Compatibilization of highly sustainable polylactide/almond shell flour composites by reactive extrusion with maleinized linseed oilIndustrial Crops and Products, 2018
- On the Use of PLA-PHB Blends for Sustainable Food Packaging ApplicationsMaterials, 2017
- Facile fabrication of aloe vera containing PCL nanofibers for barrier membrane applicationJournal of Biomaterials Science, Polymer Edition, 2016
- Development of a biocomposite based on green polyethylene biopolymer and eggshellMaterials & Design (1980-2015), 2015
- Development of environmentally friendly composite matrices from epoxidized cottonseed oilEuropean Polymer Journal, 2015
- Development of thermoplastic starch blown film by incorporating plasticized chitosanCarbohydrate Polymers, 2015
- Green composites based on wheat gluten matrix andposidonia oceanicawaste fibers as reinforcementsPolymer Composites, 2013
- Study of the Properties of Thermoset Materials Derived from Epoxidized Soybean Oil and Protein FillersJournal of Oil & Fat Industries, 2012