Thermal oxide patterning method for compensating coating stress in silicon substrates
- 14 January 2019
- journal article
- research article
- Published by Optica Publishing Group in Optics Express
- Vol. 27 (2), 1010-1024
- https://doi.org/10.1364/oe.27.001010
Abstract
We introduce a novel method for correcting distortion in thin silicon substrates caused by coating stress. Thin substrates, such as lightweight mirrors for x-ray or optical imaging, and semiconductor wafers or flat panel substrates, are easily distorted by stress in thin film coatings. We report a new method for correcting stress-induced distortion in flat silicon substrates which utilizes a micro-patterned silicon oxide layer on the back side of the substrate. Due to the excellent lithographic precision of the patterning process, we demonstrate stress compensation control to a precision of ~0.2%. The proposed process is simple and inexpensive due to the relatively large pattern features on the photomask. The correction process has been tested on flat silicon wafers that were distorted by 30 nm-thick compressively-stressed coatings of chromium, achieving RMS surface height and slope error reductions of a factor of 68 and 50, respectively.Keywords
This publication has 15 references indexed in Scilit:
- Achieving zero stress in iridium, chromium, and nickel thin filmsPublished by SPIE-Intl Soc Optical Eng ,2015
- High-precision figure correction of x-ray telescope optics using ion implantationPublished by SPIE-Intl Soc Optical Eng ,2013
- Coating thin mirror segments for lightweight x-ray opticsPublished by SPIE-Intl Soc Optical Eng ,2013
- Manufacture of mirror glass substrates for the NuSTAR missionPublished by SPIE-Intl Soc Optical Eng ,2009
- Thin optic constraintPrecision Engineering, 2006
- Metrology of thin transparent optics using Shack-Hartmann wavefront sensingOptical Engineering, 2004
- Intrinsic stress in sputter-deposited thin filmsCritical Reviews in Solid State and Materials Sciences, 1992
- SiO2 film stress distribution during thermal oxidation of SiJournal of Vacuum Science & Technology B, 1988
- Configuring an electrostatic membrane mirror by least-squares fitting with analytically derived influence functionsJournal of the Optical Society of America A, 1986
- Internal stresses in sputtered chromiumThin Solid Films, 1977