Reactive processing of polymers: effect of in situ compatibilisation on characteristics of blends of polyethylene terephthalate and ethylene-propylene rubber
- 6 January 2005
- journal article
- Published by Elsevier BV in Polymer
- Vol. 46 (1), 209-228
- https://doi.org/10.1016/j.polymer.2004.08.050
Abstract
No abstract availableKeywords
This publication has 26 references indexed in Scilit:
- Effect of PBT melt viscosity on the morphology and mechanical properties of compatibilized and uncompatibilized blends with ABSPolymer, 1999
- Effect of crosslinking reactions and order of mixing on properties of compatibilized PBT/ABS blendsPolymer, 1999
- Reactive compatibilization of HDPE/PET blends by glycidyl methacrylate functionalized polyolefinsMacromolecular Chemistry and Physics, 1999
- Morphological development with time for immiscible polymer blends with an in situ compatibilizer under controlled shear conditionsPolymer, 1998
- Compatibilization of PBT/ABS blends by methyl methacrylate-glycidyl methacrylate-ethyl acrylate terpolymersPolymer, 1998
- The Effect of the Amount of in Situ Formed Copolymers on the Final Morphology of Reactive Polymer Blends with an In Situ CompatibilizerMacromolecules, 1998
- Impact modification of poly(butylene terephthalate) by ABS materialsPolymer, 1997
- Polymer blends of PBT and PP compatibilized by ethylene-co-glycidyl methacrylate copolymersJournal of Applied Polymer Science, 1996
- Use of epoxy reactivity for compatibilization of PP/PBT and PP/LCP blendsJournal of Applied Polymer Science, 1995
- Interfacial agents for multiphase polymer systems: Recent advancesPolymer Engineering & Science, 1988