Performance and Modeling of Thermosyphon Heat Exchangers for Solar Water Heaters
- 1 August 1997
- journal article
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 119 (3), 193-200
- https://doi.org/10.1115/1.2888018
Abstract
Determining the performance of indirect solar heating systems that use thermosyphon heat exchangers requires knowledge of how thermosyphon flow rate and heat exchanger performance vary with operating conditions. In this paper, measured performance of a two-pass, tube-in-shell, double-wall heat exchanger is discussed in terms of modeling issues. Thermosyphon heat exchangers may operate in the developing, mixed convection regime where natural convection effects can significantly influence overall heat transfer and friction coefficients. Existing models which assume the thermal and hydraulic behaviors of thermosyphon heat exchangers are only functions of the thermosyphon and collector flow rates may not be suitable for all heat exchanger types. For example, the overall heat-transfer coefficient-area product for the two-pass, tube-in-shell heat exchanger is best expressed as a function of Reynolds, Grashof, and Prandtl numbers on the thermosyphon side of the heat exchanger. It is proposed that annual simulations of solar water heaters with thermosyphon heat exchangers use this type of relationship to characterize heat transfer in the heat exchanger.Keywords
This publication has 21 references indexed in Scilit:
- An empirical model for natural convection heat exchangers in SDHW systemsSolar Energy, 1995
- Experimental studies of forced, combined and natural convection of water in vertical nine-rod bundles with a square latticeInternational Journal of Heat and Mass Transfer, 1993
- Forced and combined convection of water in a vertical seven-rod bundle with P/D = 1.38International Journal of Heat and Mass Transfer, 1990
- Studies of mixed convection in vertical tubesInternational Journal of Heat and Fluid Flow, 1989
- Natural Circulation LoopsJournal of Heat Transfer, 1988
- Mixed convection friction factors and nusselt numbers in vertical annular and subchannel geometriesInternational Journal of Heat and Mass Transfer, 1988
- Heat transfer from a vertical tube bundle under natural circulation conditionsInternational Journal of Heat and Fluid Flow, 1985
- Heat transfer to water from a vertical tube bundle under natural-circulation conditions. [PWR; BWR]Published by Office of Scientific and Technical Information (OSTI) ,1983
- Effects of buoyancy on laminar vertical upward flow friction factors in cylindrical tubesNuclear Engineering and Design, 1980
- A comprehensive correlating equation for laminar, assisting, forced and free convectionAIChE Journal, 1977