Simultaneous Sulfur Dioxide and Nitrogen Dioxide Removal by Calcium Hydroxide and Calcium Silicate Solids

Abstract

At conditions typical of a bag filter exposed to a coal-fired flue gas that has been adiabatically cooled with water, calcium hydroxide and calcium silicate solids were exposed to a dilute, humidified gas stream of nitrogen dioxide (NO₂) and sulfur dioxide (SO₂) in a packed-bed reactor. A prior study found that NO₂ reacted readily with surface water of alkaline and non-alkaline solids to produce nitrate, nitrite, and nitric oxide (NO). With SO₂ present in the gas stream, NO₂ also reacted with S(IV), a product of SO₂ removal, on the exterior of an alkaline solid. The oxidation of S(IV) to S(VI) by oxygen reduced the availability of S(IV) and lowered removal of NO₂. Subsequent acidification of the sorbent by the removal of NO₂ and SO₂ facilitated the production of NO. However, the conversion of nitrous acid to sulfur-nitrogen compounds reduced NO production and enhanced SO₂ removal. A reactor model based on empirical and semi-empirical rate expressions predicted rates of SO₂ removal, NO₂ removal, and NO production by calcium silicate solids. Rate expressions from the reactor model were inserted into a second program, which predicted the removal of SO₂ and NO_x by a continuous process, such as the collection of alkaline solids in a baghouse. The continuous process model, depending upon inlet conditions, predicted 30-40% removal for NO and 50-90% removal for SO₂. These x 2 results are relevant to dry scrubbing technology for combined SO₂ and NO_x removal that first oxidizes NO to NO₂ by the addition of methanol into the flue duct.