A low temperature unitized regenerative fuel cell realizing 60% round trip efficiency and 10 000 cycles of durability for energy storage applications
- 18 February 2020
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 13 (7), 2096-2105
- https://doi.org/10.1039/c9ee03626a
Abstract
Unitized regenerative fuel cells (URFC) convert electrical energy to and from chemical bonds in hydrogen. URFCs have the potential to provide economical means for efficient long-term, seasonal, energy storage and on-demand conversion back to electrical energy. We first optimize the catalyst layer for discrete electrolyzer and fuel cell and then configure the URFC. The goal is to identify a cost competitive configuration for URFCs, and demonstrate it in terms of upper limit of round trip efficiencies (RTEs). Two possible configurations of URFCs are compared via experiments and techno-economic analysis (TEA), which emphasize the advantages of the unconventional constant-electrode (CE) URFC over the traditional constant-gas (CG) configuration. We also study the stability via accelerated stress tests (ASTs) and demonstrate steady state operation in a daily cycle for day to night energy shifting. From the investigations, the optimum composition of the URFC anode catalyst layer is 90 at% Ir-black balanced by Pt-black for both CE and CG configurations. At 80 °C and 1 A cm−2, the optimized CE URFC achieves 57% and 60% RTE with air and O2 as the reductant gases, respectively. We then evaluated the differences in durability using an AST over 10k charge–discharge cycles; the results reveal that the wider potential window at the anode in CE (0.05–1.55 V) has minimal effect on catalyst layer stability compared to CG (0.55–1.55 V). Furthermore, there was no degradation up to the range of 2k–5k cycles; beyond that the fuel cell (discharge) performance degraded while the electrolyzer (charge) performance was still stable. The observations here indicate substantial potential to employ URFCs as efficient and cost-effective bidirectional energy-conversion devices within energy storage and utilization systems after appropriate technological and operational optimizations.Funding Information
- Argonne National Laboratory (DE-AC02-06CH11357)
- Lawrence Berkeley National Laboratory (DE-AC02-05CH11231)
This publication has 42 references indexed in Scilit:
- A new perspective on global renewable energy systems: why trade in energy carriers mattersEnergy & Environmental Science, 2019
- Study of energy storage systems and environmental challenges of batteriesRenewable and Sustainable Energy Reviews, 2019
- Projecting the Future Levelized Cost of Electricity Storage TechnologiesJoule, 2019
- An updated review of energy storage systems: Classification and applications in distributed generation power systems incorporating renewable energy resourcesInternational Journal of Energy Research, 2018
- Review of electrical energy storage technologies, materials and systems: challenges and prospects for large-scale grid storageEnergy & Environmental Science, 2018
- Net-zero emissions energy systemsScience, 2018
- Hydrogen at Scale (H 2 @Scale): Key to a Clean, Economic, and Sustainable Energy SystemThe Electrochemical Society Interface, 2018
- New Insights into Perfluorinated Sulfonic-Acid IonomersChemical Reviews, 2017
- Regenerative Fuel Cell SystemsEnergy & Fuels, 1998
- Hydrogenoxygen proton-exchange membrane fuel cells and electrolyzersJournal of Power Sources, 1990