Epoxidized Vegetable Oils Plasticized Poly(lactic acid) Biocomposites: Mechanical, Thermal and Morphology Properties
Open Access
- 7 October 2014
- Vol. 19 (10), 16024-16038
- https://doi.org/10.3390/molecules191016024
Abstract
Plasticized poly(lactic acid) PLA with epoxidized vegetable oils (EVO) were prepared using a melt blending method to improve the ductility of PLA. The plasticization of the PLA with EVO lowers the Tg as well as cold-crystallization temperature. The tensile properties demonstrated that the addition of EVO to PLA led to an increase of elongation at break, but a decrease of tensile modulus. Plasticized PLA showed improvement in the elongation at break by 2058% and 4060% with the addition of 5 wt % epoxidized palm oil (EPO) and mixture of epoxidized palm oil and soybean oil (EPSO), respectively. An increase in the tensile strength was also observed in the plasticized PLA with 1 wt % EPO and EPSO. The use of EVO increases the mobility of the polymeric chains, thereby improving the flexibility and plastic deformation of PLA. The SEM micrograph of the plasticized PLA showed good compatible morphologies without voids resulting from good interfacial adhesion between PLA and EVO. Based on the results of this study, EVO may be used as an environmentally friendly plasticizer that can improve the overall properties of PLA.Keywords
Funding Information
- Ministry of Higher Education, Malaysia (5527052)
This publication has 22 references indexed in Scilit:
- Renewable polymeric materials from vegetable oils: a perspectiveMaterials Today, 2013
- Effect of epoxidized palm oil on the mechanical and morphological properties of a PLA–PCL blendResearch on Chemical Intermediates, 2013
- Biocomposites based on lignin and plasticized poly(L‐lactic acid)Journal of Applied Polymer Science, 2012
- Lubricants from chemically modified vegetable oilsBioresource Technology, 2010
- Physical properties of water‐blown rigid polyurethane foams from vegetable oil‐based polyolsJournal of Applied Polymer Science, 2007
- Green approach for the preparation of biodegradable lubricant base stock from epoxidized vegetable oilApplied Catalysis B: Environment and Energy, 2006
- Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularityPolymer, 2003
- Epoxidized soybean oil as a potential source of high-temperature lubricantsIndustrial Crops and Products, 2002
- Comparative differential scanning calorimetric analysis of vegetable oils: I. Effects of heating rate variationPhytochemical Analysis, 2002
- The study of epoxidized rapeseed oil used as a potential biodegradable lubricantJournal of Oil & Fat Industries, 2000