Impact of Shale Properties on Pore Structure and Storage Characteristics
- 16 November 2008
- proceedings article
- conference paper
- Published by Society of Petroleum Engineers (SPE)
Abstract
Characterising the pore structure of gas shales is of critical importance to establish the original gas in place and flow characteristics of the rock matrix. Methods of measuring pore volume, pore size distribution, and sorptive capacity of shales, inherited from the coalbed methane and conventional reservoir rock analyses, although widely applied, are of limited value in characterising many shales Helium which is routinely used to measure shale skeletal and grain density, permeability and diffusivity, has greater access to the fine pore structure of shale than larger molecules such as methane. Utilizing gases other than He to measure porosity or flux requires corrections for sorption to be incorporated in the analyses. Since the permeability of shales vary by several orders of magnitude with effective stress, methods that do not consider effective stress such as crushed permeability, permeability from Hg porosimetry, and from desorption are of limited utility and may be at best instructional. For shales investigated to date, clay-rich rocks have higher porosity and permeability than biogenic silica-rich shales or carbonate-rich shales. Shales rich in detrital quartz have higher porosity and permeability than shales rich in biogenic quartz and hence simply knowing the mineralogy of a shale may not be diagnostic. The porosity of most shales is mainly dependent on the degree of pore volume development in pores less than 10 um. Quantifying total gas in place in shales by much of the industry using coal desorption methods and porosity and water saturation determinations, developed for conventional reservoir rocks, may lead to substantial errors. Canister ‘desorption' methods applied to gas shales routinely captures free and solution gas as well as sorbed gas which, if considered as only sorbed gas, results in a significant overestimation of gas in place. A proprietary method of analyses, referred to as MARIO, results in rigorous total gas in place determinations that avoids errors including those associated with molecular sieving and provides a maximum value of the sorbed gas contribution to total gas.Keywords
This publication has 29 references indexed in Scilit:
- Shale gas potential of the Lower Jurassic Gordondale Member, northeastern British Columbia, CanadaBulletin of Canadian Petroleum Geology, 2007
- On the effects of petrographic composition on coalbed methane sorptionInternational Journal of Coal Geology, 2007
- Pore size distribution in mesoporous materials as studied by 1H NMRPhysical Chemistry Chemical Physics, 2001
- Permeability anisotropy of consolidated claysGeological Society, London, Special Publications, 1999
- Compaction‐driven evolution of porosity and permeability in natural mudstones: An experimental studyJournal of Geophysical Research, 1998
- Gas Adsorption on Zeolites at High PressureLangmuir, 1996
- Mercury porosimetry: state of the artPowder Technology, 1981
- THE MICROPORE SIZE DISTRIBUTIONS OF CLAY MINERAL SYSTEMSEuropean Journal of Soil Science, 1967
- The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen IsothermsJournal of the American Chemical Society, 1951
- Adsorption of Gases in Multimolecular LayersJournal of the American Chemical Society, 1938