Study of the Properties of a Biodegradable Polymer Filled with Different Wood Flour Particles
Open Access
- 12 December 2020
- Vol. 12 (12), 2974
- https://doi.org/10.3390/polym12122974
Abstract
Lignocellulosic wood flour particles with three different sizes were used to reinforce Solanyl® type bioplastic in three compositions (10, 20, and 30 wt.%) and further processed by melt-extrusion and injection molding to simulate industrial conditions. The wood flour particles were morphologically and granulometric analyzed to evaluate their use as reinforcing filler. The Fuller method on wood flour particles was successfully applied and the obtained results were subsequently corroborated by the mechanical characterization. The rheological studies allowed observing how the viscosity was affected by the addition of wood flour and to recover information about the processing conditions of the biocomposites. Results suggest that all particles can be employed in extrusion processes (shear rate less than 1000 s−1). However, under injection molding conditions, biocomposites with high percentages of wood flour or excessively large particles may cause an increase in defective injected-parts due to obstruction of the gate in the mold. From a processing point of view and based on the biocomposites performance, the best combination resulted in Solanyl® type biopolymer reinforced with wood flour particles loaded up to 20 wt.% of small and medium particles size. The obtained biocomposites are of interest for injected molding parts for several industrial applications.Keywords
This publication has 44 references indexed in Scilit:
- Bionanocomposite films based on plasticized PLA–PHB/cellulose nanocrystal blendsCarbohydrate Polymers, 2015
- Nanosilica and wood flour-modified urea–formaldehyde compositesJournal of Thermoplastic Composite Materials, 2014
- Bio-nanocomposites for food packaging applicationsProgress in Polymer Science, 2013
- Effect of Fiber Surface Treatments on Thermo-Mechanical Behavior of Poly(Lactic Acid)/Phormium Tenax CompositesJournal of Polymers and the Environment, 2013
- Effects of modified cellulose nanocrystals on the barrier and migration properties of PLA nano-biocompositesCarbohydrate Polymers, 2012
- Mechanical and thermal properties of basalt fiber reinforced poly(butylene succinate) compositesMaterials Chemistry and Physics, 2012
- Polylactide‐pine wood flour compositesPolymer Engineering & Science, 2008
- An Overview of Polylactides as Packaging MaterialsMacromolecular Bioscience, 2004
- Reactive extrusion of polycaprolactone compounds containing wood flour and ligninJournal of Applied Polymer Science, 2001
- Rheology of a Simultaneously Phase-Separating and Gelling Biopolymer MixtureMacromolecules, 1998