Speed and Frictional Effects in Hot Forging
- 1 June 1967
- journal article
- other
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers
- Vol. 182 (1), 783-798
- https://doi.org/10.1243/pime_proc_1967_182_059_02
Abstract
Simple compression tests have been made on solid and ring shaped billets at a temperature of 1120°C. The experimental variables were the impact speed of forging, which was varied from 0.07 ft/s to 40 ft/s, and the type of lubricant. The investigation was concerned with the effect of these variables on the friction conditions and the load and energy requirements.Keywords
This publication has 6 references indexed in Scilit:
- A discussion of tooling problems in high energy rate forgingInternational Journal of Machine Tool Design and Research, 1967
- The calibration of high energy-rate impact forming machinesInternational Journal of Machine Tool Design and Research, 1967
- An analysis of the changes in geometry of a short hollow cylinder during axial compressionInternational Journal of Mechanical Sciences, 1967
- Estimation of Dynamic Forces in Very High-Speed Impact ForgingJournal of Engineering for Industry, 1966
- Design and Development of Petro-Forge High Energy-Rate Forming MachinesProceedings of the Institution of Mechanical Engineers, 1965
- Press-Forging Thin Sections: Effect of Friction, Area, and Thickness on Pressures RequiredJournal of Applied Mechanics, 1949