Composition and properties of glacigenic sediments in the southwestern Barents Sea

Abstract

The composition and properties of glacigenic sediments in the southwestern Barents Sea are described based on data from 33 shallow boreholes (< 143 m below seabed) and 11 seabed cores (<4.2m below seabed). The cores are tied into a regional seismostratigraphic framework, illustrating the relationships between different boreholes. A massive, muddy diamicton (silty, sandy clay with scattered gravel) is found in nearly all cores. Average clay content (<2 pm) of this lithology is about 38%, but varies between about 25% and 50%. Short intervals of finely laminated, waterlain sediments or gravelly sand are cored in a few occasions. A high content of sand and gravel in the cores from near the Norwegian coast shows an influence of sediment input from the mainland, while material eroded from sedimentary rocks dominates farther offshore. The data presented on physical properties include undisturbed and remolded undrained shear strength, natural water content, bulk density, compressional sound velocity (P waves), Atterberg consistency limits, effective preconsolidation pressure, and consolidation coefficient. Prediction of overconsolidation from seismic mapping of erosional surfaces is confirmed by the borehole cores. High compaction is found both in Weichselian and older deposits, with a general increase in compaction toward the east as well as toward shallower water. Cores that are “underconsolidated” at their present burial depth are also reported. The average compressional sound velocity is about 1780 m/s for the borehole cores, 1550 m/s for the seabed cores, and increases with increasing shear strength and consolidation. Both horizontal and vertical sound velocities are measured in several cores, and although the data have a considerable scatter, a slightly aniso‐tropic sound velocity is indicated.