Newly Developed Decontamination Technology Based on Gaseous Reactions Converting to Carbonyl and Fluoric Compounds
- 1 November 1998
- journal article
- research article
- Published by Taylor & Francis in Nuclear Technology
- Vol. 124 (2), 147-164
- https://doi.org/10.13182/nt98-a2915
Abstract
A new gas-phase decontamination technology is developed based on gaseous reactions utilizing the volatile properties of the carbonyl and fluoric compounds of radioactive transition elements and actinides (corrosion products, fission products, and transuranium) on a material’s surface. The feasibility of this new technology is determined by removing nonradioactive (Co, Cr, Ni, Re, Mo, Mn, Ru, and Zn) and radioactive (60Co, 63Ni, and 103Ru) nuclide transition elements as gaseous forms under high CO pressure (50 to 200 atm) and high temperature (~350°C). Experiments involving U and using fluoric gases are also performed. For radioactive nuclides existing in an oxide layer of stainless steel, pretreatment with supercritical CO2 + I2 + H2O is used to remove the oxide layer completely, and by the subsequent gaseous reaction, 95 to 99% of 60Co is removed from the layer by CO gas treatment at a pressure of 200 atm. The plasma treatment using fluorine gas results in U being removed with high efficiency (~60%) after only 5 min, even at a reduced pressure of 1 Torr and at room temperature. When the carbonyl and fluoric species generated from a nontoxic gas mixture (1 Torr) of CF4 and O2 is used, U and 60Co are removed simultaneously with high removal efficiencies of 80 and 100% for 60Co and U, respectively. The data provide evidence that chemically reactive plasma treatment is available as a gas-phase decontamination method that can be conducted using nontoxic gases under safe and mild conditions such as reduced pressure, shorter time periods, and ambient temperature. Finally, a fluoric chemical reaction can be used to remove solid U deposits by converting them to gaseous U compounds at room temperature and without using plasma treatment. The pressure of ClF3 gradually affects the higher removal efficiency of U, and the removal efficiency is >90% under the conditions of 30 min and >100 Torr. The results verify that chemical reactions involving carbonylation and fluorination reactions can be utilized for gas-phase decontamination, and the potential for this new idea for decontamination is affirmed. If gas-phase decontamination technology is further developed, it will be not only convenient but also economically advantageous because decontaminating and treating the large volume of nuclear wastes - especially nonincinerable radioactive wastes - are currently very difficult.Keywords
This publication has 5 references indexed in Scilit:
- Formation of actinide hexafluorides at ambient temperatures with krypton difluorideInorganic Chemistry, 1986
- Low temperature synthesis of plutonium hexafluoride using dioxygen difluorideJournal of the American Chemical Society, 1984
- Photosynthesis of dioxygen difluorideJournal of Fluorine Chemistry, 1975
- Chemistry of the chlorine trifluoride-uranyl fluoride reactionJournal of Inorganic and Nuclear Chemistry, 1966
- Use of High-Surface-Area Sodium Fluoride to Prepare MF6. 2NaF Complexes with Uranium, Tungsten, and Molybdenum HexafluoridesInorganic Chemistry, 1964