Si/C Composites for High Capacity Lithium Storage Materials
- 1 January 2003
- journal article
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 6 (8), A154-A156
- https://doi.org/10.1149/1.1585251
Abstract
Thermal pyrolysis of polyvinyl chloride dispersed with nanosized silicon and fine graphite particles at 900°C produces a novel Si/C composite for lithium storage material. Incorporated silicon provides major capacity for lithium insertion, while the introduction of graphite component suppresses the initial irreversibility and hysteresis between charge and discharge caused by pyrolyzed carbon. The first cycle efficiency of the composite is about 85%. The large reversible capacity of ca. 700 mAh/g and good cyclability indicates that such Si/C composite may be a useful alternative to conventional graphite-based anode materials for lithium-ion cells. © 2003 The Electrochemical Society. All rights reserved.Keywords
This publication has 16 references indexed in Scilit:
- SiOx-based anodes for secondary lithium batteriesSolid State Ionics, 2002
- Carbon-Coated Si as a Lithium-Ion Battery Anode MaterialJournal of the Electrochemical Society, 2002
- Issues and challenges facing rechargeable lithium batteriesNature, 2001
- Electrochemical study on nano-Sn, Li4.4Sn and AlSi0.1 powders used as secondary lithium battery anodesJournal of Power Sources, 2001
- Lithium Insertion in SiAg Powders Produced by Mechanical AlloyingElectrochemical and Solid-State Letters, 2001
- A High Capacity Nano-Si Composite Anode Material for Lithium Rechargeable BatteriesElectrochemical and Solid-State Letters, 1999
- Sub-Microcrystalline Sn and Sn-SnSb Powders as Lithium Storage Materials for Lithium-Ion BatteriesElectrochemical and Solid-State Letters, 1999
- Si/TiN Nanocomposites Novel Anode Materials for Li-Ion BatteriesElectrochemical and Solid-State Letters, 1999
- Lithium Insertion in Carbon‐Silicon Composite Materials Produced by Mechanical MillingJournal of the Electrochemical Society, 1998
- Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage MaterialScience, 1997