The relationship between substratum surface roughness and microbiological and organic soiling: A review
- 1 April 2001
- journal article
- review article
- Published by Taylor & Francis in Biofouling
- Vol. 17 (1), 59-71
- https://doi.org/10.1080/08927010109378465
Abstract
Substratum surface roughness has a well documented effect on the retention of microorganisms. Implications of this encompass problems in hygiene, infection, fouling, equipment function, corrosion and cleanabil‐ity. This paper reviews methods used for visualising surface topography and measuring roughness which are pertinent to microbiologists, and notes limitations of some of the descriptors of surface roughness. A major issue is the scale on which the surface defects are examined: measurements may now be made in nanometers, but the significance of surface texture at this scale in terms of microbial retention has yet to be investigated in detail. Stainless steel and ceramics are commonly used as hygienic food preparation surfaces. Their wear has been visualised, with roughness measured on a nanometer scale using the atomic force microscope (AFM), and the effect on surface wear of cleanability using microbial and organic soil investigated. Surface analytical methods such as X‐ray photoelectron spectroscopy (XPS) and time of flight secondary ion mass spectroscopy (ToFSIMS) provided information on the chemical structure at the uppermost atomic layer and demonstrate that microorganisms were removed more rapidly than organic material from the worn surfaces, and that organic soil conditioned the surfaces prior to microbial contamination. On this scale, the dimensions of surface defects were more suited to soil retention than to microbial cell retention. Traditional microscopic methods were not able to differentiate adequately between soil and microbial removal. Surface analytical techniques provide the opportunity to measure and visualise surface roughness and its effect on microbial and organic soiling on a hitherto unavailable level of detection.Keywords
This publication has 45 references indexed in Scilit:
- Fractal Analysis of Hard Disk Surface Roughness and Correlation With Static and Low-Speed FrictionJournal of Tribology, 1999
- Microtextured surfaces: Towards macrofouling resistant coatingsBiofouling, 1999
- Surface fine structure of treated dentine investigated with tapping mode atomic force microscopy (TMAFM)Journal of Dentistry, 1999
- Trends in surface roughnessInternational Journal of Machine Tools and Manufacture, 1998
- Biofilms in dairy manufacturing plant‐description, current concerns and methods of controlBiofouling, 1997
- Processes of bioadhesion on stainless steel surfaces and cleanability: A review with special reference to the food industryBiofouling, 1996
- A comparative evaluation with respect to the bacterial cleanability of a range of wall and floor surface materials used in the food industryJournal of Applied Bacteriology, 1996
- The influence of metallic surface wettability on bacterial adhesionJournal of Adhesion Science and Technology, 1993
- Cleanability in relation to bacterial retention on unused and abraded domestic sink materialsJournal of Applied Bacteriology, 1990
- Influence of augmented surfaces and of surface finish on particulate fouling in double pipe heat exchangersChemical Engineering and Processing - Process Intensification, 1990