Input Nyquist sampling suffices to identify and compensate nonlinear systems
- 1 January 1998
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Signal Processing
- Vol. 46 (10), 2833-2837
- https://doi.org/10.1109/78.720389
Abstract
Nonlinear systems usually cause spectral spreading resulting in an output signal bandwidth greater than that of the input signal. When identifying and compensating nonlinear systems by digital methods, it has been common practice to set the sampling frequency at the Nyquist rate of the output signal. This correspondence presents experimental evidence for the author's proposal that nonlinear systems can be identified and compensated at the lowest possible sampling rate: the Nyquist rate of the input signalKeywords
This publication has 7 references indexed in Scilit:
- Utilization of digital polyspectral analysis to estimate transfer functions of cubically nonlinear systems with nonGaussian inputsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- Measurement, composition and inversion of orthogonal representations of memoryless nonlinearitiesPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Applications of higher-order statistics to modelling, identification and cancellation of nonlinear distortion in high-speed samplers and analogue-to-digital converters using the Volterra and Wiener modelsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Nonlinear compensation using orthogonal inverses: broadband inputs and robustness issuesPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Sampling requirements for Volterra system identificationIEEE Signal Processing Letters, 1996
- Generalized sampling theoremIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 1992
- The uncorrelated output components of a nonlinearityIEEE Transactions on Information Theory, 1968