Equilibrium Parametric Pumps
- 1 February 1974
- journal article
- research article
- Published by Taylor & Francis in Separation Science
- Vol. 9 (1), 35-45
- https://doi.org/10.1080/01496397408080042
Abstract
Semicontinuous and continuous pumps were experimentally investigated at various operating conditions. The model system used was toluene-n-heptane on silica gel adsorbent. It has been shown that when the penetration distance for the cold cycle is less than or equal to that for the hot cycle and the height of the column, the pump has the capacity of complete removal of solute from one product stream. A quantity which is important in determining pump performance is the equilibrium parameter, b. Pump performance is enhanced by a large value of b.Keywords
This publication has 5 references indexed in Scilit:
- Separations via semicontinuous parametric pumpingAIChE Journal, 1973
- Separations via continuous parametric pumpingAIChE Journal, 1972
- Characteristics of Batch, Semicontinuous, and Continuous Equilibrium Parametric PumpsSeparation Science, 1971
- Parametric pumping: Behavior of open systems part 1: Analytical solutionsThe Chemical Engineering Journal, 1970
- Equilibrium Theory of Parametric PumpIndustrial & Engineering Chemistry Fundamentals, 1969