High Capacity, Reversible Silicon Thin-Film Anodes for Lithium-Ion Batteries
Top Cited Papers
- 1 January 2003
- journal article
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 6 (9), A198-A201
- https://doi.org/10.1149/1.1596918
Abstract
The properties of amorphous 250 nm and 1 μm silicon films deposited by radio-frequency (rf) magnetron sputtering on copper foil are investigated using -ray diffraction, scanning electron microscopy (SEM), and electrochemical methods. Galvanostatic half-cell electrochemical measurements conducted between 0.02 and 1.2 V using a lithium counter electrode have shown that the 250 nm Si thin films exhibit an excellent reversible specific capacity of nearly 3500 mAh/g when tested for 30 cycles. The high reversible capacity and excellent cyclability of the 250 nm sputtered silicon thin films suggest excellent adhesion between Si and Cu leading to high capacity retention. SEM analysis conducted on the 250 nm Si films after the 30th charge suggests the good adhesion of the diam “plates” of silicon to the copper substrate. © 2003 The Electrochemical Society. All rights reserved.Keywords
This publication has 19 references indexed in Scilit:
- Electrochemical lithiation of tin and tin-based intermetallics and compositesElectrochimica Acta, 1999
- Lithium alloy negative electrodesJournal of Power Sources, 1999
- A room temperature study of the binary lithium–silicon and the ternary lithium–chromium–silicon system for use in rechargeable lithium batteriesJournal of Power Sources, 1999
- Active/Inactive Nanocomposites as Anodes for Li-Ion BatteriesElectrochemical and Solid-State Letters, 1999
- Lithium alloy negative electrodes formed from convertible oxidesSolid State Ionics, 1998
- Pyrolysed pitch-polysilane blends for use as anode materials in lithium ion batteries II: the effect of oxygenSolid State Ionics, 1997
- Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage MaterialScience, 1997
- Pyrolysed pitch-polysilane blends for use as anode materials in lithium ion batteriesSolid State Ionics, 1997
- Small particle size multiphase Li-alloy anodes for lithium-ionbatteriesSolid State Ionics, 1996
- Lithium insertion in pyrolyzed siloxane polymersSolid State Ionics, 1994