Graded mixed-layer organic light-emitting devices
- 4 February 2002
- journal article
- research article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 80 (5), 725-727
- https://doi.org/10.1063/1.1446992
Abstract
We describe the performance of graded, mixed-layer organic light- emitting devices (OLEDs). The devices are step graded from a mostly hole transporting layer (HTL) to a mostly electron transporting layer (ETL) from anode side to cathode side, respectively. Luminous efficiencies of >4.5 lm/W and 10 cd/A are obtained at 1000 cd/m2 for green, electrofluorescent, graded mixed OLEDs. These efficiencies are significantly higher than those of a uniformly mixed device, i.e., a device in which the HTL and ETL are uniformly mixed, but lower than those of a conventional heterostructure device employing the same dopant material. The operating lifetime of the graded mixed OLEDs, however, is much improved over the heterostructure device. The results of our work suggest that the graded mixed OLED device structure represents a path to achieving extended lifetimes with sufficient efficiency for flat panel display applications in which this parameter is critical to market acceptance.Keywords
This publication has 7 references indexed in Scilit:
- Carrier transport properties of organic materials for EL device operationSynthetic Metals, 2000
- Organic light-emitting diodes with a bipolar transport layerApplied Physics Letters, 1999
- Very high-efficiency green organic light-emitting devices based on electrophosphorescenceApplied Physics Letters, 1999
- Degradation Mechanism of Small Molecule-Based Organic Light-Emitting DevicesScience, 1999
- Highly efficient phosphorescent emission from organic electroluminescent devicesNature, 1998
- Doped organic electroluminescent devices with improved stabilityApplied Physics Letters, 1997
- Organic Electroluminescent Devices Using a Mixed Single LayerJapanese Journal of Applied Physics, 1994