Large Particle Size Distribution in Five U.S. Cities and the Effect on a New Ambient Participate Matter Standard (PM10)

Abstract

A mobile aerosol-sampling system was used to determine the large particle ambient aerosol size distribution (up to approximately 100 μm particle diameter) in five cities across the United States: Birmingham, Alabama; Research Triangle Park, North Carolina; Philadelphia, Pennsylvania; Phoenix, Arizona; and Riverside, California. A mobile wide range aerosol classifier (WRAC) developed at the University of Florida was used. The study shows that any measurement of ambient particulate matter with a size-fractionating inlet sampler will be influenced by the ambient particle size distribution. Mass distribution measurements determined by the WRAC were compared with mass measurements obtained simultaneously using TSP Hi-Vol and 15 μm cut-size inhalable particulate network samplers. Aerosol size-classification results showed the presence of a large particle mass mode at all sites sampled. The position and magnitude of the large particle mode varied and was not a simple function of concentration. The percentage of the total aerosol mass collected by the present EPA reference method high-volume air sampler varied from about 85 to 95%. The percentage of total aerosol mass less than 10 μm varied from about 50 to 90%, depending on the sampling location and sampling condition.