Characterisation of Niobium Carbide and Carbonitride Evolution within Ferrite: Contribution of Transmission Electron Microscopy and Advanced Associated Techniques
- 1 November 2005
- journal article
- Published by Trans Tech Publications, Ltd. in Materials Science Forum
- Vol. 500-501, 669-676
- https://doi.org/10.4028/www.scientific.net/msf.500-501.669
Abstract
Niobium is a strong carbide forming element which is often used in microalloyed steels to control the grain size during thermomechanical treatments and to provide strengthening through precipitation processes. A detailed microscopic investigation is one of the keys for understanding the first stages of the precipitation sequence, thus Transmission Electron Microscopy (TEM) is required. The main difficulty of TEM studies is due to the nanometre scale dimensions of the particles, which makes their detection, structural and chemical characterization delicate. Model Fe- (Nb0.06%,C0.05%) and Fe-(Nb0.05%,C0.03%,N0.03%) ferritic alloys subjected to isothermal annealing treatments have been investigated. High Resolution TEM (HRTEM) and conventional TEM (CTEM) were used to characterise the morphology, nature and location of precipitates. Volume fraction measurements and a statistical approach to the determination of precipitate size histograms have been investigated using Energy Filtered TEM (EFTEM) and High Angle Annular Dark Field (HAADF) imaging. Chemical compositions were quantified by Electron Energy Loss Spectroscopy (EELS). The evolution of precipitate composition with time and temperature is compared with previous simulations obtained from new thermodynamic models based on equilibrium boundary conditions.Keywords
This publication has 11 references indexed in Scilit:
- Gibbs?Thomson effects in phase transformationsScripta Materialia, 2005
- Microscopic modelling of simultaneous two-phase precipitation: application to carbide precipitation in low-carbon steelsMaterials Science and Engineering: A, 2003
- Quantitative analysis of complex carbo-nitride precipitates in steelsScripta Materialia, 2002
- Precipitation of NbC in a model austenitic steelActa Materialia, 2002
- Complex heterogeneous precipitation in titanium–niobium microalloyed Al-killed HSLA steels—I. (Ti,Nb)(C,N) particlesActa Materialia, 2000
- Microalloyed Strip Steels for the 21st CenturyMaterials Science Forum, 1998
- On the detection of MX‐precipitates in microalloyed steels using energy‐filtering TEMJournal of Microscopy, 1996
- The influence of niobium supersaturation in austenite on the static recrystallization behavior of low carbon microalloyed steelsMetallurgical and Materials Transactions A, 1996
- Electron Energy-Loss Spectroscopy in the Electron MicroscopePublished by Springer Nature ,1996
- The effect of niobium on the hardenability of microalloyed austeniteMetallurgical and Materials Transactions A, 1995