Rectangular Waveguide Filters Using Photoimageable Thick-film Processing
- 1 September 2002
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Abstract
Band-pass H-plane offset Rectangular Waveguide filters at W-Band (75-110GHz) and F-Band (90-140GHz) are presented. The filters are designed using multilayer thick-film processing with Alumina as a base. The process incorporates photoimageable thick-film paste for better precision and sharpness at the corners of the offsets. The filters do not require any tuning and are described with regard to their manufacture and measurement results. The centre frequencies are 85GHz and 105GHz and their relative bandwidths are ≈ 10%. The filters are de-embedded using a specially designed calibration set which uses the multiline TRL technique. Insertion loss of 5 dB and return loss less than 15 dB is measured for waveguide thickness of 18μm.Keywords
This publication has 4 references indexed in Scilit:
- Photoimageable thick-film millimetre-wave metal-pipe rectangular waveguidesElectronics Letters, 2001
- A multiline method of network analyzer calibrationIEEE Transactions on Microwave Theory and Techniques, 1991
- The Displaced Rectangular Waveguide Junction and its Use As an Adjustable Reference ReflectionIEEE Transactions on Microwave Theory and Techniques, 1984
- Microwave bandpass filters consisting of rectangular waveguides with 1-dimensional offsetsInternational Journal of Circuit Theory and Applications, 1978