Analysis of SFIT saw filters using coupling of modes model
- 1 November 2004
- journal article
- research article
- Published by Taylor & Francis in Journal of the Chinese Institute of Engineers
- Vol. 27 (7), 973-979
- https://doi.org/10.1080/02533839.2004.9670952
Abstract
This paper presents a study on using the coupling‐of‐model (COM) model to analyze wide‐band SAW filters with slanted finger interdigital transducers (SFIT). In contrast to other design methods, the COM model is more convenient and more simple to use for designing different types of electrodes by just changing the elements of a P‐matrix. In this paper, we give a complete description of how to use the COM approach to analyze SFIT SAW filters and show a comparison of simulated and experimental frequency responses of the SFIT SAW filter. Two SFIT SAW filters with 30% bandwidth, 60 MHz center frequency, and different numbers of SFIT pairs were designed. On the experimental side, SFIT SAW filters using YZ‐LiNbO3 as the substrate material were fabricated and the on‐wafer frequency responses were measured. Comparisons made between the simulated and measured frequency responses showed good agreement.Keywords
This publication has 7 references indexed in Scilit:
- SAW filters including one-focus slanted finger interdigital transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2003
- Surface Acoustic Wave Filter Using Floating Electrode Slanted Finger Unidirectional TransducersJapanese Journal of Applied Physics, 2000
- Automatic computer-aided design of SAW filters using slanted finger interdigital transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2000
- Design technique for nonlinear phase SAW filters using slanted finger interdigital transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1998
- Design techniques for SAW filters using slanted finger interdigital transducersIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1997
- Improved Modeling of Wide-Band Linear Phase SAW Filters Using Transducers with Curved FingersIEEE Transactions on Sonics and Ultrasonics, 1984
- Wide-Band Linear Phase SAW Filter Design Using Slanted Transducer FingersIEEE Transactions on Sonics and Ultrasonics, 1982