Review of SAW oscillator performance
- 1 January 1994
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 43-54 vol.1
- https://doi.org/10.1109/ultsym.1994.401550
Abstract
State-of-the-art phase noise performance has been demonstrated for both surface acoustic wave (SAW) resonator and delay line stabilized oscillators. The same basic feedback-loop oscillator design philosophy was applied in each case in order to achieve these results. This paper reviews the design, fabrication, component selection, and performance for an extremely low-noise SAW resonator hybrid circuit oscillator. Finally, several recent results including the flicker noise of SAW resonator devices and the vibration sensitivity of all quartz package SAW resonators are discussed in the context of potential SAW oscillator performance enhancementsKeywords
This publication has 29 references indexed in Scilit:
- An analysis of the in-plane acceleration sensitivity of ST cut quartz surface wave resonators with interior rectangular supportsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- Applications of laser-trimming for all-quartz package, surface acoustic wave devicesPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- Improved vibration sensitivity of the all quartz package surface acoustic wave resonatorPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2003
- 1/f noise in surface acoustic wave (SAW) resonatorsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Design and performance of an extremely low noise surface acoustic wave oscillatorPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- Dynamic and static pressure sensitivities of AQP SAW oscillatorsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2002
- 1/f noise in etched groove surface acoustic wave (SAW) resonatorsIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1994
- Dependence of SAW resonator 1/f noise on device sizeIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1993
- A Novel Technique for Trimming the Frequency of a Sealed Surface Acoustic Wave ResonatorPublished by Institute of Electrical and Electronics Engineers (IEEE) ,1987
- A Miniature Hybrid Circuit SAW Oscillator Using an All Quartz Packaged ResonatorPublished by Institute of Electrical and Electronics Engineers (IEEE) ,1985