Kaolins: their properties and uses

Abstract

The main commercially important kaolin resources are the primary deposits in Cornwall and the sedimentary deposits in South Carolina and Georgia in the U.S.A. Annual world production is about 18 Mt (1 t = 10 ³ kg). In 1981 the U.K. production was 2.6 x 10 ⁶ t of which about 77 % represented paper filler and paper coating grades. About 15% of the U.K. production is used in ceramics. The kaolin extracted from the commercial deposits contains kaolinite as the major component together with ancilliary minerals. The kaolinite particles take the form of pseudo-hexagonal platelets with widths that vary from 10 to 0.1 pm and less. Surface chemical properties have been widely researched. There is no uniformity of view on the origin of the cation exchange capacity. Aqueous suspensions of kaolin are flocculated at low pH. This can be understood in terms of the positively charged edges and the negatively charged faces of the platelets. The deflocculation of kaolin under alkaline conditions is important, and is assisted by adding a polyanion. The Kubelka-Munk equations have provided a useful basis for interpreting the optical properties of kaolins in terms of an absorption coefficient ( k ) and a scattering coefficient ( s ). The parameter k ; is a bulk property and is interpreted in terms of light absorption by ancilliary minerals, by coatings of hydrated iron oxides on the kaolinite particles and by transition metals in the kaolinite structure. The parameter s depends on the size distribution of the platelets and the manner in which they are packed together. The rheological properties of deflocculated suspensions of kaolin in water are important in modern paper coating applications. The relation between the bulk physical properties of kaolin and rheology is complex. Viscosity at low rates of shear increases with increasing specific surface area of the kaolin. Viscosity at high rates of shear depends on the shapes of the particles and their packing. The extraction and production of kaolins are described for both primary and sedimentary deposits. The main use of kaolin is as a paper filler and a paper coating pigment. The various filler and coating grades are indicated, and effect of kaolin properties on coated sheet properties is discussed. Kaolin is a major component in most ceramic bodies. Examples of formulations are given. The manufacture of sanitaryware and tableware is discussed in terms of kaolin properties. Kaolin is used as an extender in aqueous based paints and as a filler in rubber and synthetic polymers.