Air-coupled ultrasonic estimation of viscoelastic stiffnesses in plates
- 1 November 1996
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 43 (6), 1171-1180
- https://doi.org/10.1109/58.542061
Abstract
Materials characterization by means of megahertz air-coupled ultrasound is reported in this paper. In plates of composite laminates the reconstruction of a function closely related to the transmission coefficient has been accomplished using leaky guided waves. The spatial and frequency dependence of the transmitted leaky waves have been measured for a variety of plates, including aluminum-aramid and graphite-epoxy. These results are based on a general method, developed in this paper, to reconstruct a transmission function experimentally from scans both of receiver position and incident angle. A synthetic aperture technique is utilized to reduce the measurements by forming an effective wide-angle focused aperture. This synthetic focused aperture is obtained experimentally by summing measured signals coherently for many transmitter-receiver separations and summing incoherently for many transducer angles with respect to the plate normal. These results have been employed to deduce, with high precision, a function related to the plane-wave transmission coefficient of the plate over the frequency and angular bandwidths covered by the measurements. Calculation of this function is demonstrated, and the source of its deviation from the plane-wave transmission coefficient is explained. The experimental results show good agreement when compared to three-dimensional theoretical beam calculations. The high degree of accuracy in the measured transmission function has been exploited to construct an efficient inversion algorithm to estimate the viscoelastic material properties and/or sample thickness.Keywords
This publication has 27 references indexed in Scilit:
- Floquet analysis of guided waves in periodically layered compositesThe Journal of the Acoustical Society of America, 1995
- Broadband electrostatic transducers: Modeling and experimentsThe Journal of the Acoustical Society of America, 1995
- Photoacoustic testing of ultrasonic air transducersMeasurement Science and Technology, 1994
- Micromachined 1–3 composites for ultrasonic air transducersReview of Scientific Instruments, 1994
- Resonance EMAT system for acoustoelastic stress measurement in sheet metalsReview of Scientific Instruments, 1993
- Ultrasonic transducers and transducer arrays for applications in airMeasurement Science and Technology, 1992
- A two-dimensional Fourier transform method for the measurement of propagating multimode signalsThe Journal of the Acoustical Society of America, 1991
- Precision laser-ultrasonic velocity measurement and elastic constant determinationUltrasonics, 1989
- Metal plate testing using airborne ultrasoundUltrasonics, 1973
- Plate wave resonance — a contactless test methodUltrasonics, 1971