Electrical Breakdown in High Vacuum
- 1 June 1955
- journal article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 26 (6), 720-725
- https://doi.org/10.1063/1.1722078
Abstract
Currents preceding breakdown have been measured between closely spaced tungsten electrodes in high vacuum. It is found that field emission currents sufficient to evaporate anode metal flow before breakdown. These currents follow the Fowler‐Nordheim equation when field magnification due to surface irregularities on the cathode is taken into account. The field magnification is a function of distance at electrode separations less than 4×10−4 cm. Explanation of the observed breakdown at low voltage and small spacing requires an unusually high yield of electrons at the cathode per ion formed in the gap. Furthermore there is no measurable direct enhancement of the current by ionization even at higher voltages. The high electron yield must therefore exist over the entire observed range of breakdown voltages. This high yield is satisfactorily accounted for by the increase in field emission due to the positive ion space charge, which in turn increases the positive ion current density until there is breakdown. It is shown that breakdown occurs when the field emission current is increased by only 65 percent. This condition is reached with the ion current density much smaller than the electron current density.Keywords
This publication has 13 references indexed in Scilit:
- Arcing of Electrical Contacts in Telephone Switching CircuitsBell System Technical Journal, 1954
- Arcing of Electrical Contacts in Telephone Switching CircuitsBell System Technical Journal, 1953
- Arcing of Electrical Contacts in Telephone Switching CircuitsBell System Technical Journal, 1953
- Surface films and field emission of electronsProceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 1953
- Field Emission: Large Current Densities, Space Charge, and the Vacuum ArcPhysical Review B, 1953
- Arcing at Electrical Contacts on Closure. Part II. The Initiation of an ArcJournal of Applied Physics, 1951
- Arcing at Electrical Contacts on Closure. Part I. Dependence upon Surface Conditions and Circuit ParametersJournal of Applied Physics, 1951
- Erosion of Electrical Contacts on MakeJournal of Applied Physics, 1949
- Ejection of Electrons by Ions at High FieldsPhysical Review B, 1948
- Electron emission in intense electric fieldsProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1928