The Temperature Scale and the Melting Point of Molybdenum
- 1 June 1925
- journal article
- research article
- Published by American Physical Society (APS) in Physical Review B
- Vol. 25 (6), 846-857
- https://doi.org/10.1103/PhysRev.25.846
Abstract
Spectral emissivities and temperature scales of Mo from 300° to 2900°K. A tubular filament of pure Mo was made by winding ribbon in a close helix about 15 mm long and 1 mm in diam. Spectral emissivities were then obtained by observing the ratio of the outer surface brightness to the interior brightness as seen through small holes in the wall. The results were checked by two other methods. At room temperature the spectral reflectivities were determined and found to be independent of previous heat treatment. For the emissivities at 300°, 1500° and 2800°K are 0.419, 0.371 and 0.331; for 0.424, 0.390 and 0.365 each within ±.007. These values are all lower than those reported by others, probably because of the greater purity of the Mo or of the better black body conditions. Hence these are believed more reliable. These emissivities lead to a difference between true temperature and brightness temperature as a function of the brightness temperature of 46° at 1000°, 113° at 1500°, 217° at 2000°, and 370° at 2500°K.
Keywords
This publication has 7 references indexed in Scilit:
- Das spektrale Emissionsvermögen und der Schmelzpunkt des WolframsThe European Physical Journal A, 1924
- The True Temperature Scale of Tungsten and its Emissive Powers at Incandescent TemperaturesPhysical Review B, 1917
- The emissivity of metals and oxides. II. Measurements with the micropyrometerBulletin of the Bureau of Standards, 1915
- The Melting-Point of MolybdenumThe Astrophysical Journal, 1913
- The Relation Between Black-Body and True Temperatures for Tungsten, Tantalum, Molybdenum, and Carbon and the Temperature Variation of Their Reflecting PowerThe Astrophysical Journal, 1913
- Über das Schmelzen und Verdampfen unserer sogenannten hochfeuerfesten StoffeAngewandte Chemie, 1911
- The reflecting power of various metalsBulletin of the Bureau of Standards, 1911