Crack propagation thresholds: A measure of surface energy
- 1 December 1986
- journal article
- Published by Springer Nature in Journal of Materials Research
- Vol. 1 (6), 852-860
- https://doi.org/10.1557/jmr.1986.0852
Abstract
Crack propagation thresholds in brittle materials are explained by consideration of the work done by the applied loading and that needed to create new surfaces as a crack propagates. The threshold mechanical energy release rate is shown to be a measure of the equilibrium surface energy of the material, dependent on the chemical environment. For applied loadings greater than those needed to maintain equilibrium the surface energy term introduces nonlinearities into the crack propagation characteristics. Any surface force or lattice trapping behavior at the crack tip will not influence the observed threshold provided the crack tip remains invariant on crack extension. A simple indentation/strength technique is demonstrated that permits the surface energy in the equilibrium state to be estimated. The technique is applied to the propagation of cracks in sapphire and the surface energy in water estimated as 1.42 J m−2, suggesting that the surfaces in water are stabilized by interactions stronger than van der Waals forces or hydrogen bonding alone.Keywords
This publication has 31 references indexed in Scilit:
- The effect of lateral crack growth on the strength of contact flaws in brittle materialsJournal of Materials Research, 1986
- Work of Fracture and Crack Healing in GlassJournal of the American Ceramic Society, 1985
- Microstructure‐Strength Properties in Ceramics: II, Fatigue RelationsJournal of the American Ceramic Society, 1985
- Wetting: statics and dynamicsReviews of Modern Physics, 1985
- Thermodynamics of translational crack layer propagationJournal of Materials Science, 1985
- Theory of Fatigue for Brittle Flaws Originating from Residual Stress ConcentrationsJournal of the American Ceramic Society, 1983
- Fatigue analysis of brittle materials using indentation flawsJournal of Materials Science, 1982
- An empirical stress-intensity factor equation for the surface crackEngineering Fracture Mechanics, 1981
- Thermodynamics of the quasi-static growth of Griffith cracksJournal of the Mechanics and Physics of Solids, 1978
- Formulas for Stress and StrainJournal of Applied Mechanics, 1976