High-quantum-efficiency Er^3+ fiber lasers pumped at 980 nm
- 15 September 1989
- journal article
- Published by Optica Publishing Group in Optics Letters
- Vol. 14 (18), 1002-1004
- https://doi.org/10.1364/ol.14.001002
Abstract
Significant improvements in the operation of Er3+-doped silica fiber lasers operating at wavelengths between 1.5 and 1.6 μm are reported. The use of 980 nm as the pump wavelength provides an output that is limited mainly by the quantum efficiency of the lasing process. It is thus considerably more efficient than previous results using ~810-nm pumping, where excited-state absorption degrades the lasing performance. Operation at three discrete output wavelengths is observed and is accounted for by studying gain across the lasing bandwidth.Keywords
This publication has 12 references indexed in Scilit:
- Pump excited-state absorption in erbium-doped fibersOptics Letters, 1988
- Lasing characteristics of Er3+-doped silica fibers from 1553 up to 1603 nmJournal of Applied Physics, 1988
- Advances in diode laser pumpsIEEE Journal of Quantum Electronics, 1988
- Efficient operation of an Yb-sensitised Er fibre laser pumped in 0.8 μm regionElectronics Letters, 1988
- Losses in fibre laser cavitiesElectronics Letters, 1988
- Efficient operation of array-pumped Er3+ doped silica fibre laser at 1.5 μmElectronics Letters, 1988
- Solution-doping technique for fabrication of rare-earth-doped optical fibresElectronics Letters, 1987
- Diode-laser-pumped operation of an Er3+-doped single-mode fibre laserElectronics Letters, 1987
- Variation of Er3+ cross section for stimulated emission with glass compositionJournal of Physics D: Applied Physics, 1972
- Yb3+–Er3+ GLASS LASERApplied Physics Letters, 1965