High-quality HfSixOy gate dielectrics fabricated by solid phase interface reaction between physical-vapor-deposited metal–Hf and SiO2 underlayer
- 19 July 2004
- journal article
- Published by AIP Publishing in Applied Physics Letters
- Vol. 85 (3), 449-451
- https://doi.org/10.1063/1.1767593
Abstract
We fabricated high-quality Hf–silicate (HfSixOy) gate dielectrics by utilizing the solid phase interface reaction between physical-vapor-deposited metal–Hf (typically 0.5nm thick) and SiO2 underlayers. Metal diffusion to the SiO2 layer increases the permittivity of the underlayer, while preservation of the initial SiO2∕Si bottom interface ensures good electrical properties of the gate dielectrics. The Hf–silicate layer remains amorphous and the poly-Si∕HfSixOy gate stack endures activation annealing at 1000°C. The interface trap density was comparable to that of conventional SiO2 dielectrics and the hysteresis of capacitance–voltage curves was as low as 4mV for a bias swing between −2 and +2.5V. Moreover, high electron mobility, equal to 89% of the universal mobility, was obtained for the high-k gate transistor.This publication has 5 references indexed in Scilit:
- Roughness at ZrO2/Si interfaces induced by accelerated oxidation due to the metal oxide overlayerApplied Physics Letters, 2003
- La–silicate gate dielectrics fabricated by solid phase reaction between La metal and SiO2 underlayersApplied Physics Letters, 2003
- High-κ gate dielectrics: Current status and materials properties considerationsJournal of Applied Physics, 2001
- Thermal stability and electrical characteristics of ultrathin hafnium oxide gate dielectric reoxidized with rapid thermal annealingApplied Physics Letters, 2000
- Stable zirconium silicate gate dielectrics deposited directly on siliconApplied Physics Letters, 2000