Some theoretical considerations relating to strain concentration in elastic-plastic bending of beams

Abstract

Theoretical derivations are presented for the relations between maximum deflection and the corresponding maximum strain for some simple beams subject to elastic-plastic bending. Both elastic-perfectly plastic and arbitrary stress-strain relations are considered. Where possible, explicit analytical solutions are given, but where this is not possible numerical solutions are obtained by means of computer programmes. The calculations show that in elastic-perfectly plastic material short plastic zones may develop and cause large strains in the beam even though the deflection corresponding to first yield is not greatly exceeded. On the other hand, strain hardening elongates the plastic zones, so producing a more favourable strain distribution along the length of the beam than would exist without it. The more pronounced the strain-hardening characteristic, i.e. the greater the rate of increase of stress with strain, the less concentrated will be the strains. The mode of loading is important in that the higher the rate of change of bending moment, in the region of ihe maximum bending moment, the more concentrated will be the local strains.