Creep of conventional and microfilled dental composites

Abstract

The creep of microspecimens of two conventional and two microfilled composites was studied using a torsional creep apparatus. Small stresses below the materials' proportional limits were maintained for 3 h and recovery was monitored for 30 h. Creep curves were obtained at 21.5,37, and 50°C, and three torque levels. The composites exhibited linear viscoelastic behavior at low deformations. The magnitude of creep depended on the amount and type of resin in the composites. The materials did not recover their original shape after 30 h after the stress was removed. No transitions were observed in the temperature range employed. The shear moduli decreased with temperature and are in reasonable agreement with literature values obtained with other tests.