Diesel Engines: Environmental Impact and Control
Top Cited Papers
- 1 June 2001
- journal article
- review article
- Published by Taylor & Francis in Journal of the Air & Waste Management Association
- Vol. 51 (6), 809-847
- https://doi.org/10.1080/10473289.2001.10464315
Abstract
The diesel engine is the most efficient prime mover commonly available today. Diesel engines move a large portion of the world's goods, power much of the world's equipment, and generate electricity more economically than any other device in their size range. But the diesel is one of the largest contributors to environmental pollution problems worldwide, and will remain so, with large increases expected in vehicle population and vehicle miles traveled (VMT) causing ever-increasing global emissions. Diesel emissions contribute to the development of cancer; cardiovascular and respiratory health effects; pollution of air, water, and soil; soiling; reductions in visibility; and global climate change. Where instituted, control programs have been effective in reducing diesel fleet emissions. Fuel changes, such as reduced sulfur and aromatics content, have resulted in immediate improvements across the entire diesel on- and off-road fleet, and promise more improvements with future control. In the United States, for example, 49-state (non-California) off-road diesel fuel sulfur content is 10 times higher than that of national on-road diesel fuel. Significantly reducing this sulfur content would reduce secondary particulate matter (PM) formation and allow the use of control technologies that have proven effective in the on-road arena. The use of essentially zero-sulfur fuels, such as natural gas, in heavy-duty applications is also expected to continue. Technology changes, such as engine modifications, exhaust gas recirculation, and catalytic after treatment, take longer to fully implement, due to slow fleet turnover. However, they eventually result in significant emission reductions and will be continued on an ever-widening basis in the United States and worldwide. New technologies, such as hybrids and fuel cells, show significant promise in reducing emissions from sources currently dominated by diesel use. Lastly, the turnover of trucks and especially off-road equipment is slow; pollution control agencies need to address existing emissions with in-use programs, such as exhaust trap retrofits and smoke inspections. Such a program is underway in California. These and other steps that can be continued and improved will allow the use of the diesel engine, with its superior fuel consumption, to continue to benefit society while greatly reducing its negative environmental and health impacts. The next ten years can and must become the “Decade of Clean Diesel.”Keywords
This publication has 35 references indexed in Scilit:
- Global Trends in Diesel Emissions Regulation - A 2001 UpdateSAE International Journal of Advances and Current Practices in Mobility, 2001
- Global Trends in Diesel Emissions Control - A 1999 UpdateSAE International Journal of Advances and Current Practices in Mobility, 1999
- California's Revised Heavy-Duty Vehicle Smoke and Tampering Inspection ProgramPublished by SAE International ,1998
- Deterioration Effect of Three-way Catalyst on Nitrous Oxide EmissionSAE International Journal of Advances and Current Practices in Mobility, 1998
- The Romance of EnginesPublished by SAE International ,1997
- Development of the First CARB Certified California Alternative Diesel FuelPublished by SAE International ,1993
- Effects of Fuel Aromatics, Cetane Number, and Cetane Improver on Emissions from a 1991 Prototype Heavy-Duty Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 1990
- Integrating Diverse Data Sets to Assess the Risks of Airborne PollutantsPublished by Springer Nature ,1989
- Fuel Sulfur Reduction for Control of Diesel Particulate EmissionsSAE International Journal of Advances and Current Practices in Mobility, 1987
- Pollution Damage to Works of ArtPublished by Springer Nature ,1974