Oxidation of ultrahigh molecular weight polyethylene characterized by Fourier Transform Infrared Spectrometry
- 1 October 1997
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research
Abstract
The effects of processing conditions, sterilization treatment, aging time, and poststerilization aging environment on the oxidation behavior of ultrahigh molecular weight polyethylene (UHMWPE) are examined. Oxidation is monitored by observing changes in the carbonyl peak appearing in Fourier Transform Infrared Spectrometry (FTIR) and is found to be relatively insensitive to processing conditions but strongly influenced by sterilization treatments and aging parameters. Oxygen uptake by UHMWPE increases as a result of gamma or electron beam irradiation and continues to rise during subsequent aging at a rate influenced by the aging environment. A hydrogen peroxide ambient causes more severe oxidation than either air or hyaluronic acid. Control (unsterilized) samples and those sterilized in ethylene oxide are resistant to oxidation under all conditions except hydrogen peroxide aging. © 1997 John Wiley & Sons, Inc. J Biomed Mater Res, 37, 43–50, 1997.Keywords
This publication has 11 references indexed in Scilit:
- Gamma sterilization of UHMWPE articular implants: an analysis of the oxidation problemBiomaterials, 1996
- Free radicals trapped in polyethylene crystalsJournal of Macromolecular Science, Part B, 1995
- Ultra-high molecular weight polyethylene. The material and its use in total joint implants.Journal of Bone and Joint Surgery, 1994
- Osteolysis and particle disease in hip replacement: A reviewActa Orthopaedica, 1994
- Clinical reviews: Particulate debris and failure of total hip replacementsJournal of Applied Biomaterials, 1993
- Osteolysis after total knee arthroplasty without cement.Journal of Bone and Joint Surgery, 1992
- The effect of γ radiation on the physical structure and mechanical properties of ultrahigh molecular weight polyethyleneJournal of Applied Polymer Science, 1989
- Mechanism of ageing in irradiated polymersPolymer Degradation and Stability, 1988
- Property changes of UHMW polyethylene hip cup endoprostheses during implantationJournal of Biomedical Materials Research, 1984
- Effect of radiation sterilization and aging on ultrahigh molecular weight polyethyleneJournal of Biomedical Materials Research, 1981