A belt worn controller and lithium‐ion battery pack have been developed for use with the initial clinical trials of the Jarvik 2000 heart. Patient interface considerations, safety, and simplicity were major design inputs for the system. The controller was developed using all analog technology to avoid difficulties with electromagnetic interference (EMI), to minimize susceptibility to electrostatic discharge, and to avoid the need for software validation. Manual control of pump speed is accomplished by a patient operated knob, according to physician instructions for rest and exercise for each individual patient. The system includes alarms and indicators which show the following: the amount of remaining battery charge, if the battery is low and needs replacement, the power in watts being consumed, if the power consumed is above 15 W, if the pump is running below the selected speed setting, and if the pump stops. The control box, curved to be worn on the belt, is only 2.5 inches high for comfort when sitting. The battery pack, also form fitted for patient comfort, weighs just over 1½ pounds and supplies 65 W‐h of energy storage, sufficient to run the device for over 8 h at nominal load.