Surface Replicas for Use in the Electron Microscope

Abstract

A simple method is described for making replicas of surfaces for study in the electron microscope. The surface to be studied is cleaned and then coated with a very thin slightly wedge‐shaped film of polyvinyl formal having a range in thickness from about 500 to 750A in 2.5 cm. This film is formed by dipping the prepared surface into a 0.5‐percent solution of the resin dissolved in dioxane or ethylene dichloride and permitting the solvent to evaporate while the surface is held in a vertical position. The replica film is removed by placing the coated surface under water and peeling the film from it. A description of this technique is given in detail. A graph is presented which shows the thickness of resin films obtainable from various concentrations of resin in dioxane, and a table gives the interference effects which may be used for determining approximate thicknesses of thin resin films. Several easy procedures are described for checking the thickness of such films. A technique is described for preparing strong films having a thickness of 100A and an area of 3 cm² when mounted in air. Such films are very useful when working with the electron microscope and several methods are described for mounting specimens on them, including a conditioning treatment—useful in mounting water suspensions—which makes one surface very hydrophilic. Five micrographs show the results obtainable with the techniques described.