Fabrication of Two Tesla Magnet Using Bi-2212 Ag-Sheathed Tapes
- 1 March 1994
- journal article
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 33 (3B), L421
- https://doi.org/10.1143/jjap.33.l421
Abstract
Pancake-type superconducting coils were fabricated using Ag-sheathed Bi-2212 tapes. The conventional powder-in-tube method was used where the metal composition of powders are Bi:Sr:Ca:Cu=2:2.3:0.85:2, different from the stoichiometric 2212 composition. Heat treatment was performed in the reduced oxygen partial pressure of 0.01 atm. The superconducting magnet assembled from pancake coils generated a field of 2.0 T at 4.2 K using the 1×10-13 Ω· m criterion. The J c was 3.9×104 A/cm2.Keywords
This publication has 7 references indexed in Scilit:
- Improvement of Jc of Ag-Sheathed Bi-2212 Tapes Using Melt-Growth Technique under Reduced Oxygen Partial PressureJapanese Journal of Applied Physics, 1993
- Phase stability limits of Bi2Sr2Ca1Cu2O8+δ and Bi2Sr2Ca2Cu3O10+δApplied Physics Letters, 1992
- In situ x-ray investigation of the melting of Bi-Sr-Ca-Cu-O phasesApplied Physics Letters, 1991
- Transport Critical Current Properties of Silver-Sheathed Bi-Based Superconducting Tapes and Coils at 4.2 KJapanese Journal of Applied Physics, 1991
- Microstructures and Jc-B Characteristics of Ag-Sheathed Bi-Based Superconducting WiresJapanese Journal of Applied Physics, 1991
- High Critical Current Density in Silver-Sheathed Bi2Sr2Ca1Cu2AgyOx TapeJapanese Journal of Applied Physics, 1990
- Partial Melt Growth Process of Bi2Sr2Ca1Cu2Ox Textured Tapes on SilverJapanese Journal of Applied Physics, 1990