Dopant segregation in polycrystalline silicon

Abstract

Dopant segregation at grain boundaries in polycrystalline silicon has been investigated. Arsenic, phosphorus, and boron were ion implanted into low‐pressure, chemically‐vapor‐deposited polycrystalline‐silicon films. All films were then annealed at 1000 °C for 1 h, and some were subsequently further annealed at 800, 850, or 900 °C for 64, 24, or 12 h, respectively. For phosphorus and arsenic the room‐temperature resistivity of the films was found to be higher after annealing at lower temperatures. By successively annealing the same sample at lower and higher temperatures, the resistivity would repeatedly increase and decrease, indicating reversible dopant segregation at the grain boundaries. Hall measurements were used to estimate the number of active dopant atoms within the grains and the number of atoms segregated at the grain boundaries as a function of annealing temperature. A theory of segregation in systems of small particles has been developed. Using this theory, the heat of segregation of arsenic and phosphorus in polycrystalline silicon was calculated. For boron no appreciable segregation was observed.