Impact of the Minimum Head on Low-Head Hydropower Plants Energy Production and Profitability
Open Access
- 20 December 2020
- Vol. 13 (24), 6728
- https://doi.org/10.3390/en13246728
Abstract
In Poland, existing barrages are characterized by relatively high flow and low head, which is challenging for the effective utilization of theoretical watercourse power. The paper presents the impact of the minimum head of the hydro sets on the annual electricity production of small hydropower plants at low-head locations for two types of water turbines: Archimedes and Kaplan turbines. A developed mathematical model was used to simulate energy yield from Archimedes and Kaplan turbines for a given value of the minimum technical head, depending on the number of installed hydro sets. For economic analysis purposes, the levelized cost of electricity (LCOE) and net present value (NPV) indicators were calculated. The conducted research allowed for comparing Archimedes and Kaplan’s turbine operating conditions and how the minimum head parameter influences their electricity production and utilization time. As concluded in the results, the influence of minimum head in energy production is more distinct for the Archimedes screw technology than for the Kaplan turbine. The research shows that the decrease in energy production associated with the hydro unit’s minimum head parameter is from 0% to 30% for Kaplan, and it is 6% to 52% for Archimedes turbines.Keywords
This publication has 37 references indexed in Scilit:
- Modeling and experimental results of an Archimedes screw turbineRenewable Energy, 2016
- Dynamic model of small hydro plant using archimedes screwPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2015
- Operation, performance and economic analysis of low head micro-hydropower turbines for rural and remote areas: A reviewRenewable and Sustainable Energy Reviews, 2015
- Could Europe have more mini hydro sites? A suitability analysis based on continentally harmonized geographical and hydrological dataRenewable and Sustainable Energy Reviews, 2014
- A micro hydro power plant for distributed generation using municipal water waste with archimedes screwPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2013
- Assessment of electrical energy production in small hydropower plant with ultra-low headPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2013
- Analytical Model for Water Inflow of an Archimedes Screw Used in Hydropower GenerationJournal of Hydraulic Engineering, 2013
- Performance of a bulb turbine suitable for low prototype head: model test and transient numerical simulationIOP Conference Series: Earth and Environmental Science, 2012
- Experimental investigation of a Kaplan draft tube – Part I: Best efficiency pointApplied Energy, 2012
- A modification method on runner blades in a Bulb turbineIOP Conference Series: Earth and Environmental Science, 2010