Modeling and Estimation of Tip Contact Force for Steerable Ablation Catheters
- 9 January 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Biomedical Engineering
- Vol. 62 (5), 1404-1415
- https://doi.org/10.1109/tbme.2015.2389615
Abstract
Objective: The efficacy of catheter-based cardiac ablation procedures can be significantly improved if real-time information is available concerning contact forces between the catheter tip and cardiac tissue. However, the widely used ablation catheters are not equipped for force sensing. This paper proposes a technique for estimating the contact forces without direct force measurements by studying the changes in the shape of the deflectable distal section of a conventional 7-Fr catheter (henceforth called the “deflectable distal shaft,” the “deflectable shaft,” or the “shaft” of the catheter) in different loading situations. Method: First, the shaft curvature when the tip is moving in free space is studied and based on that, a kinematic model for the deflectable shaft in free space is proposed. In the next step, the shaft shape is analyzed in the case where the tip is in contact with the environment, and it is shown that the curvature of the deflectable shaft provides useful information about the loading status of the catheter and can be used to define an index for determining the range of contact forces exerted by the ablation tip. Results: Experiments with two different steerable ablation catheters show that the defined index can detect the range of applied contact forces correctly in more than 80% of the cases. Based on the proposed technique, a framework for obtaining contact force information by using the shaft curvature at a limited number of points along the deflectable shaft is constructed. Conclusion: The proposed kinematic model and the force estimation technique can be implemented together to describe the catheter's behavior before contact, detect tip/tissue contact, and determine the range of contact forces. Significance: This study proves that the flexibility of the catheter's distal shaft provides a means of estimating the force exerted on tissue by the ablation tip.Keywords
Funding Information
- Natural Sciences and Engineering Research Council of Canada
- Discovery (RGPIN1345)
- CREATE program (371322-2009)
- Canada Foundation for Innovation and the Ontario Research Fund
- London Health Sciences Centre (Canadian Surgical Technologies & Advanced Robotics) and to Western University
This publication has 13 references indexed in Scilit:
- A pseudo-rigid-body 3R model for a steerable ablation catheterPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2013
- Design and Kinematic Modeling of Constant Curvature Continuum Robots: A ReviewThe International Journal of Robotics Research, 2010
- Intrinsic Wrench Estimation and Its Performance Index for Multisegment Continuum RobotsIEEE Transactions on Robotics, 2010
- Relationship Between Catheter Forces, Lesion Characteristics, “Popping,” and Char Formation: Experience with Robotic Navigation SystemJournal of Cardiovascular Electrophysiology, 2009
- Catheter Kinematics for Intracardiac NavigationIEEE Transactions on Biomedical Engineering, 2009
- Novel Contact Force Sensor Incorporated in Irrigated Radiofrequency Ablation Catheter Predicts Lesion Size and Incidence of Steam Pop and ThrombusCirculation: Arrhythmia and Electrophysiology, 2008
- An Investigation of the Intrinsic Force Sensing Capabilities of Continuum RobotsIEEE Transactions on Robotics, 2008
- Ablation of cardiac arrhythmias — energy sources and mechanisms of lesion formationPublished by Springer Nature ,2006
- Kinematics for multisection continuum robotsIEEE Transactions on Robotics, 2006
- Vision based shape estimation for continuum robotsPublished by Institute of Electrical and Electronics Engineers (IEEE) ,2004