An axial velocity estimator for ultrasound blood flow imaging, based on a full evaluation of the Doppler equation by means of a two-dimensional autocorrelation approach
- 1 July 1995
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 42 (4), 672-688
- https://doi.org/10.1109/58.393110
Abstract
This paper introduces a new velocity estimator, referred to as the 2D autocorrelator, which differs from conventional Doppler techniques in two respects: the derivation of axial velocity values by evaluating the Doppler equation using explicit estimates of both the mean Doppler and the mean RF frequency at each range gate location; and, the 2D nature (depth samples versus pulse transmissions) of processing within the range gate. The estimator's output can be calculated by evaluating the 2D autocorrelation function of the demodulated (baseband) backscattered echoes at two lags. A full derivation and mathematical description of the estimator is presented, based on the framework of the 2D Fourier transform. The same framework is adopted to analyze two other established velocity estimators (the conventional 1D autocorrelator and the crosscorrelator) in a unifying manner, and theoretical arguments as well as experimental results are used to highlight the common aspects of all three estimators. In addition, a thorough performance evaluation is carried out by means of extensive simulations, which document the effect of a number of factors (velocity spread, range gate length, ensemble length, noise level, transmitted bandwidth) and provide an insight into the optimum parameters and trade-offs associated with individual algorithms. Overall, the 2D autocorrelator is shown to offer the best performance in the context of the specific simulation conditions considered here. Its superiority over the crosscorrelator is restricted to cases of low signal-to-noise ratios. However, the 2D autocorrelator always outperforms the conventional 1D autocorrelator by a significant margin. These comparisons, when linked to the computational requirements of the proposed estimator, suggest that it combines the generally higher performance of 2D broadband time-domain techniques with the relatively modest complexity of 1D narrowband phase-domain velocity estimators.<>Keywords
This publication has 39 references indexed in Scilit:
- Adaptive estimation of the mean frequency of a doppler signal from short data windowsJapanese Journal of Clinical Oncology, 1991
- Estimation of mean frequency and variance of ultrasonic Doppler signal by using second-order autoregressive modelIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1991
- On the determination of the position of extrema of sampled correlatorsIEEE Transactions on Signal Processing, 1991
- Low-order AR models for mean and maximum frequency estimation in the context of Doppler color flow mappingIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1990
- Time-domain estimation of the center frequency and spread of Doppler spectra in diagnostic ultrasoundIEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 1988
- Deterministic approach towards ultrasound speckle reductionIEE Proceedings A Physical Science, Measurement and Instrumentation, Management and Education, Reviews, 1987
- Simulation of Real-Time Frequency Estimators for Pulsed Doppler SystemsUltrasonic Imaging, 1986
- A note on the application of the Hilbert transform to time delay estimationIEEE Transactions on Acoustics, Speech, and Signal Processing, 1981
- Spectral Moment Estimates from Correlated Pulse PairsIEEE Transactions on Aerospace and Electronic Systems, 1977
- A covariance approach to spectral moment estimationIEEE Transactions on Information Theory, 1972