InP metal-insulated-semiconductor Schottky contacts using surface oxide layers prepared with bromine water
- 1 September 1980
- journal article
- research article
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 51 (9), 4905-4907
- https://doi.org/10.1063/1.328362
Abstract
Oxide layers prepared with bromine water are found to increase the barrier height for Au‐InP Schottky diodes. Electrical characteristics are measured and the relationships between the preparation conditions and the diode parameters are examined. The typical value of the barrier height and the ideality factor are 0.83 eV and 1.1, respectively. Some instabilities are observed in the diode characteristics.Keywords
This publication has 8 references indexed in Scilit:
- Low-threshold 1.25-μm vapor-grown InGaAsP cw lasersApplied Physics Letters, 1979
- Ion-implanted n-channel InP metal semiconductor field-effect transistorApplied Physics Letters, 1978
- Low leakage nearly ideal Schottky barriers to n-InPElectronics Letters, 1978
- Bias dependence of GaAs and InP MESFET parametersIEEE Transactions on Electron Devices, 1977
- Controlled barrier height InP Schottky diodes prepared by sulfur diffusionApplied Physics Letters, 1977
- Electrical characteristics of Au/Ti-(n-type) InP Schottky diodesJournal of Physics D: Applied Physics, 1977
- High efficiency n-CdS/p-InP solar cells prepared by the close-spaced techniqueSolid-State Electronics, 1977
- InP Schottky-gate field-effect transistorsIEEE Transactions on Electron Devices, 1975