Investigation of the bonding strength and interface current of p-Si/n-GaAs wafers bonded by surface activated bonding at room temperature
- 1 November 2001
- journal article
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures
- Vol. 19 (6), 2114-2118
- https://doi.org/10.1116/1.1414115
Abstract
Equivalent bulk strength of the interface between p-Si/n-GaAs bonded through the surface activated bonding (SAB) method is found. The interface current was extensively investigated. Nonideal behavior of the pn junction current is found to be due to the tunneling current between the conduction band and valence band across the transition region associated with band gap states. Interface current decreases with increasing sputtering time and energy and vice versa. Irradiation time and energy dependent behavior indicates that the accumulation of radiation induced defects associated with the doping controls the interface current of p-Si/n-GaAs. Moreover, strong impact of the exposure to an ultrahigh vacuum atmosphere of the activated surfaces on the interface current of p-Si/p-Si is found. Finally it can be suggested that a laser diode can be fabricated by the bonding between p-Si and n-GaAs through the SAB method, because of the achievement of equivalent bulk strength of the interface.Keywords
This publication has 8 references indexed in Scilit:
- Si/Si Interface Bonded at Room Temperature by Ar Beam Surface ActivationMaterials Science Forum, 1998
- 1.3 μm InGaAsP/InP lasers on GaAs substrate fabricated by the surface activated wafer bonding method at room temperatureApplied Physics Letters, 1998
- Effect of the surface treatment on the room-temperature bonding of Al to Si and SiO2Journal of Materials Science, 1998
- Wafer direct bonding of compound semiconductors and silicon at room temperature by the surface activated bonding methodApplied Surface Science, 1997
- Electrical properties of lateral p - n junctions formed on patterned (110) GaAs substratesSemiconductor Science and Technology, 1997
- Room temperature GaAsSi and InPSi wafer direct bonding by the surface activated bonding methodNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1997
- Low-energy ion damage in semiconductors: A progress reportJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 1996
- Structure of AlAl and AlSi3N4 interfaces bonded at room temperature by means of the surface activation methodActa Metallurgica et Materialia, 1992